Installing The Battery Pack - Canon PowerShot S100 DIGITAL ELPH User Manual

14 Preparing the Camera

Installing the Battery Pack

Install rechargeable Battery Pack NB-1L in the camera as shown below.
• Please recharge the battery pack (
the first time.
Battery Lock
• The camera contains a built-in rechargeable lithium battery to
save the date and time settings whenever the main battery is
removed. The main battery and AC adapter (optional) recharge
this battery whenever the camera is powered by them. When you
first purchase the camera, please leave the main battery in the
camera for approximately four hours or plug in the AC adapter
(optional) for that length of time. This battery will recharge even
when the camera's main switch is set to Off.
• If the Set Date/Time menu displays when the main switch is
turned on, the charge of the built-in lithium battery is low. Please
follow the procedure in the previous paragraph to recharge it.
p. 12) before you use it for
• Slide the battery cover in the
direction of the arrows.
• Press the battery lock while inserting
the battery pack all the way in until
the lock clicks.
• To remove the battery pack, press the
battery lock and pull the battery pack
out.
• Slide the battery cover closed.