Fitting The Tap - SEMAK HCD05 Operation And Warranty Booklet

7.8.3 Fitting the tap

To fl t the tap correctly b ack in place proceed as follows;
hold down the button , making sure that the rod is completely extract ed;
introduce the tap into the seat provided and push until the pushbutton re-
turns to its initial position.
7.9. Internal sanitization
Warnin g! t he t her m ostat m u st be s et to - OFF-.
Carry out the following steps:
prepare the sanitising solution
(see paragraph 7.7);
fill the bowl with the sanitising solution;
leave the solution to act for about 30 minutes;
empty out the sanitising solution from the bowl;
then rinse out the bowl and inside surfaces thoroughly to elim inate all resi-
dues of sanitizing solution.
SL320001846 Ed.03 - 06/2008
04/2010
7.10. Cleaning the drip tray
T he drip tray shou ld be empt i ed and cleaned dally.
Note: t h e tray nee ds t o b e e mpti e d out a nd cleaned every t ime
that the red f lo at fitted t o t he grid rises; thi s is t o st op llquid
fr om leaki n g out.
lift the tray with grid and pull it outwards to remove it from lts seating;
wash the tray and grid separately with lukewarm water.;
dry all of the compon ents;
reposition the grid on top of the tray;
fit the tray back in place and press down to secure i t to the mach ine.
7.11. Cleaning the bowl lid
Rem ove the b owl lid from the mac hine;
clean the surface using a damp cloth and/or a non-abrasive spong e soaked
in sanitising product.
rinse thoroughly using clean water.
- 17 EN -