Cleaning The Pan - SEMAK HCD05 Operation And Warranty Booklet

press the button (A) securing the tap to the machine and then remove the
tap (B) with both hands, as illustrated in the figure;

7.5. Cleaning the pan

lt is necessary to remove all parts fitted to the pan.
Remove any product left in the bowl, see paragraph 7.2;
remove the bowl from the machine, see paragreph 7.3;
remove the tap from the machine, see paragraph 7.4;
clean the entire surface of the pan using a damp cloth and/or a non-abrasive
sponge;
SL320 00 184 6 E d.03 - 06/ 20 0 8
04/2010
clean the channel connecting the bowl and the tap, using a cleaning brush,
as illustrated in the figure;
refit the tap;
pour a little water inside the pan;
use the tap to drain out all of the water from the pan so as to eliminate any
small product residues inside the dispensing channel.
- 1 3_ E N -