Select The Delay Start - Zanussi ZWC1301 User Manual

Hide thumbs Also See for ZWC1301:
Table of Contents

Advertisement

When you set a programme with prewash, put the detergent for prewashing phase directly
into the drum.
Always follow the instructions that you find on the packaging of the detergent products, but
we recommend that you do not exceed the maximum indicated level (
however guarantee the best washing results.
After a washing cycle, if necessary, remove any detergent residue from the detergent
dispenser.
SELECT THE REQUIRED PROGRAMME BY
MEANS OF THE PROGRAMME SELECTOR
DIAL
Turn the programme selector dial to the required
programme. The selector can be turned either
clockwise or anticlockwise.
The green light of button Start/Pause
flash.
The pilot lights corresponding to all phases
composing the selected programme are on.
On position
the programme is reset and the
machine is switched OFF.
At the end of the programme the selector dial must
be turned to position
If you turn the programme selector dial
to another programme when the
machine is working, the lights in the
programme progress display will start
to flash to indicate a wrong selection.
The machine will not perform the new
selected programme.
SELECT THE SPIN SPEED, RINSE HOLD OR
NO SPIN OPTION
Select the spin speed, Rinse Hold option or No
Spin option by turning the spin speed selector.
The position 1300 rpm for Cotton is equivalent
to 900 rpm for the Synthetic and Wool
programmes and 700 rpm for the Delicate wash
programme.
Rinse Hold Rinse Hold
By selecting this option the water of the last rinse is
not emptied out to prevent the fabrics from
creasing. When the programme has finished, the
lights D and E are lit to indicate that the water must
be emptied out (See: 'At the end of the
programme').
No Spin 0
By selecting this option all the spinning phases are
excluded. To be used for extremely delicate
starts to
to switch the machine off.
material. The machine will add some additional
rinses to the cotton and synthetic programmes.
For the maximum spin speed allowed by each
programme, refer to the chapter 'Programme
Chart'.
SELECT THE FLEXITIME OPTIONS
Before you start the programme you can decrease
the programme duration. Use this option for items
with daily soil. The related indicator comes on.
By selecting Super Quick
be reduced approx. 30 minutes for cotton and by
20 minutes for synthetic. The machine will perform
1 rinse less.
By selecting Quick
reduced approx. 10 minutes. This option is
recommended for lightly soiled white-/coloured and
synthetic laundry.
You must select this option after you have set
the programme and before you press button
Start/Pause
.
You can cancel or modify the Quick or Super
Quick at any moment, before you press button
Start/Pause
.

SELECT THE DELAY START

Before you start the programme, if you wish to
delay the start, press the button Delay Start
repeatedly, to select the desired delay. The light
corresponding to the set delay lights up.
Delay
Start
You must select this option after you have set the
programme and before you press button Start/
Pause.
You can cancel or modify the delay time at any
moment, before you press button Start/Pause.
). This quantity will
the washing time will
the washing time will be
8h
4h
2h
15

Advertisement

Table of Contents
loading

Table of Contents