UNIVIEW NVR30864R User Manual page 73

2. Select the camera and then select Enable. To detect all faces in the
detection area, select Detect All Faces.
3. Click Draw and then draw a detection area using the mouse. Adjust
detection sensitivity as needed to achieve optimal effects.
4. Click
more details, see
5. (Optional) Click
when actions will be triggered.
6. Click Apply to save the settings.
Intrusion Detection
Intrusion detection is used to detect objects entering specified area(s)
and trigger actions as needed.
1. Click Alarm > VCA > Intrusion Detection.
2. Select the camera and then select Enable to enable intrusion
detection.
3. Draw detection areas on the screen and set detection rules
including sensitivity, threshold and percentage. Up to four areas
are allowed. The threshold means the minimum length of time an
object stays in the detection area(s). The percentage means the
right to Trigger Actions and set action(s) to trigger. For
Alarm-Triggered
right to Arming Schedule and then set the time
Actions.
65