The Input Setting Menu - Sony VPL-EW5 Operating Instructions Manual

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input signal.
When the signal is input from a computer
Setting items Functions
Adjust Signal...
Dot Phase Adjusts the dot phase of the LCD panel and the signal
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.
H Size Adjusts the horizontal size of a picture output from a
computer. Adjust the setting according to the dots of
the input signal.
For details, see page 52.
Shift Adjusts the position of the picture. H adjusts the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
position and the
Aspect (When the You can set the aspect ratio of the picture to be
video signal is displayed for the current input signal. This item is
input) enabled only when an video signal (preset memory
numbers 1 to 11) is input.
• Normal*
• 4:3*
• 16:9*
• Full*
• Zoom: Select to enlarge the original picture without
• Wide Zoom*
b B
or the key to adjust the horizontal
v V
and
1
: Select to view a picture with normal 4:3
aspect ratio.
2
: Makes the aspect ratio 4:3.
2
: Select to view a picture squeezed.
1
: Select to view a picture of 16:9 or of 4:3
squeezed.
distorting the aspect ratio.
1
: Select to enlarge a picture with
minimum distortion.
key for the vertical position.
The INPUT SETTING Menu
Initial setting
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal
33