Connecting A Vcr - Sony VPL-EW5 Operating Instructions Manual

Connecting a VCR

This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
Rear side
to audio
output (L)
to S
video
to video
output
output
VCR
1 Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2 Video cable (not supplied) or S-Video cable
(not supplied)
To connect to a video GBR/
Component output connector
Rear side
VPL-EX50
audio
output
1 Signal Cable (not supplied)
HD D-sub 15-pin (male) ↔ 3 × phono jack
2 Stereo audio connecting cable (not supplied)
to audio
(Use a no-resistance cable.)
output (R)
Notes
• For stereo audio connection, connect the
stereo audio connecting cable to following
connectors:
VPL-EX5/ES5: INPUT A/VIDEO IN
AUDIO connector
VPL-EW5: INPUT A AUDIO connector
VPL-EX50: INPUT A/B AUDIO connector
• Set the aspect ratio using "Aspect" on the
INPUT SETTING menu according to the
input signal.
• When you connect the projector to a video
GBR output connector, select "Video GBR"
or when you connect the projector to a
component output connector, select
"Component" with the "Input-A Signal Sel."
setting on the SET SETTING menu.
to to
audio
output
(L) (R)
VCR
Connecting the Projector
VPL-EX50
to video
GBR/
component
output
21