Warning Messages - Sony VPL-CX85 Operating Instructions Manual

Symptom
The computer cannot be
controlled with the
presentation tool.
Others
Symptom
The LAMP/COVER
indicator flashes.
The LAMP/COVER
indicator lights up.
The TEMP/FAN indicator
flashes.
The TEMP/FAN indicator
lights up.
Both the LAMP/COVER
and TEMP/FAN indicators
light up.
The control panel keys do
not function.

Warning Messages

Use the list below to check the meaning of the messages displayed on the screen.
Message
High temp.!
Probably use in high
altitude. Switch to high
altitude mode on? Yes V
No v
High temp.!
Lamp off in 1 min.
Cause and Remedy
• The USB cable is used.
• The Air Shot is not used.
c The presentation tool is designed to use with the Air Shot.
Use the Remote Commander to operate the device connected via
the USB cable.
Cause and Remedy
• The lamp cover or the air filter cover is detached.
c Attach the cover securely (see pages 42 and 43).
• The lens protector does not open due to a problem.
c Slide the lens protector by hand, and then press the I/
• The lamp has reached the end of its life.
c Replace the lamp (see page 41).
• The lamp becomes a high temperature.
c Wait for 60 seconds to cool down the lamp and turn on the
power again.
• The fan is broken.
c Consult with qualified Sony personnel.
• The internal temperature is unusually high.
c Check to see if nothing is blocking the ventilation holes.
• The projector is used at a high altitude.
c Ensure that "High Altitude Mode" in the INSTALL SETTING
menu is set to "On."
• The electrical system breaks down.
c Consult with qualified Sony personnel.
• The control panel keys are locked.
c Unlock the control panel keys (see page 37).
Meaning and Remedy
• Internal temperature is too high.
c When using the projector at an altitude of 1,500 m or higher, set
"High Altitude Mode" in the INSTALL SETTING menu to
"On" (see page 40).
c If this message appears on the screen when using the projector
at normal altitudes, check to see if anything is blocking the
ventilation holes (exhaust).
• Internal temperature is too high.
c Turn off the power.
c Check to see if nothing is blocking the ventilation holes.
1
key.
47
GB
Maintenance