Sony VPL-CX75 Operating Instructions Manual page 7

Note on Access Control
This unit cannot read Memory Stick that
has Access Control with other units. To
read/write data on the Access Control
Memory Stick, unlock the Memory
Stick with the unit that has locked it.
Note on Memory Stick (with
memory select function)
• You cannot use all the available memory
at the same time and/or continuously.
• Do not use the memory select switch
while the Memory Stick is connected to
any compatible device that is compatible
for use with this feature, as this may
cause a malfunction. If you use the
memory select function while the
Memory Stick is connected to any
compatible device and there is a
malfunction, we will not honor the
guarantee.
• When using the memory select switch,
make sure to firmly move the switch to
the end. If you do not switch it
completely, it may cause a problem or
malfunction.
• Check your memory selection on
Memory Stick before inserting it into
the Memory Stick slot of the compatible
device.
• When you use Memory Stick with
memory select function, you can choose
the type of memory by switching the
memory select switch. As the compatible
device will only access the memory
selected by you, note the following:
– A formatting (initializing) process is
executed for the selected memory only.
– Remaining memory display reflects
only selected memory information.
– Error display reflects only selected
memory information.
Each memory is handled individually
by selecting it.
On MagicGate
MagicGate is copyright protection
technology that uses encryption technology.
Format to save a file
Material for a presentation converted by the
Projector Station for Presentation is saved
in the following file formats in the
Memory Stick.
• Image files (DCF-compatible)
compressed in the JPEG (Joint
Photographic Experts Group) format
(extension .jpg).
• The Sony Projector Presentation file (SPP
file), which is an original file format of
Sony. This file integrates information
such as destination and setting
information of the image file, etc.
Before using a Memory Stick
Terminal
Write-
protect
tab
• When you set the Memory Stick
erasure prevention switch to Lock, data
cannot be recorded, edited, or erased.
* Some Memory Sticks (Memory Stick
Duo) are not equipped with an erasure
prevention switch. When using a
Memory Stick without an erasure
prevention switch, be careful not to edit or
erase data by mistake.
• Use a sharp object, such as a ballpoint
pen, to move the Memory Stick Duo/
Memory Stick PRO Duo erasure
prevention switch.
• Data may be damaged if:
– You remove the Memory Stick or
turn off the unit while it is reading or
writing data.
– You use the Memory Stick in a
location subject to the effects of static
electricity or electric noise.
• We recommend that you make a backup
copy of important data that you record on
Memory Stick.
About a Memory Stick
Labeling
position
(Continued)
7