Sony VPL-CX75 Operating Instructions Manual page 30

Caution regarding messages while using a Memory Stick
Use the list below to check the message meanings.
Message
No Memory Stick
No files that can be
displayed.
No files in this folder that
can be displayed.
No movie files in this folder
that can be displayed.
No still files in this folder
that can be displayed.
Cannot play
Cannot play
Memory Stick locked
Memory Stick error
Memory Stick type error
Format error
File error
Read Only Memory
Access denied
Sony Corporation
30
Solution
c Insert a Memory Stick into the Memory Stick slot correctly.
c No presentation files are contained in the Memory Stick.
c Digital Camera Mode is selected, although no DCF
compatible picture file are contained.
c No picture files are contained in the currently selected folder.
c No movie picture files are contained in the currently selected
folder, although "Filter" is set to "Movie" in the "Option"
menu.
c No still picture files are contained in the currently selected
folder although "Filter" is set to "Still" in the "Option" menu.
c The
key has been pressed while no movie picture files
are contained in the selected folder. Slide show will not start.
c Movie picture file(s) is damaged.
c The erasure prevention switch on the Memory Stick is set
to LOCK. Release the lock.
c The Memory Stick is damaged.
c Clean the terminal on the Memory Stick.
c The Memory Stick with memory select function has not
been selected correctly with the memory select switch.
c A Memory Stick that is not compatible, or cannot be used
with the projector has been inserted.
c The Memory Stick has not been formatted correctly.
Format it on this projector correctly.
c Formatting was not successful.
c The selected folder has not been named correctly.
c Enter the name again using less than 66 characters (including
"/") by displaying the Select Folder menu.
c A read-only Memory Stick containing picture files has been
inserted. You cannot record or delete data with a read-only
Memory Stick.
c A Memory Stick with Access Control from another unit is
inserted. You cannot read/write data in this projector. To
read/write data on a Memory Stick with Access Control,
unlock the Memory Stick with the unit that has locked it.