When Simple Mode Is Not Used - Sony VPL-CX75 Operating Instructions Manual

Connecting/disconnecting the
projector and computer
You can also connect or disconnect the
projector manually.
When accessing from the computer
Open the main window of Projector Station
for Air Shot and connect/disconnect the
computer and the projector referring to the
help manual.
When accessing from the projector
1
Press the AIR SHOT key on the
remote commander.
The connectable computer list appears.
2
Press M or m key on the remote
commander to select the computer to
be connected, and then press the
ENTER key.
Appears when the computer is connected.
Yamada PC
Tanaka PC
Suzuki PC
Saito PC
Sakuma PC
Connect PC?
Connecting PC: Yamada PC
For disconnecting
Press M or m key to select the computer to be
disconnected, and then press the ENTER
key.
Note
Disconnect the projector and the computer in
one of the two ways to stop the projection on
the projector and remove the USB wireless
LAN module.
10
Wireless Connection
(xxx. xxx. xx. x)
( xx. x. xx. xx )
(xxx. xxx. xx. x)
( xx. x. xx. xx )
(xxx. xxx. xx. x)
When Simple Mode is not
Used
Setting the projector
1
Insert the supplied wireless LAN card
into the slot of the projector.
For details, see page 5.
2
Turn on the projector.
3
Press the AIR SHOT key on the
remote commander.
The home display of Air Shot appears.
4
Press the ENTER key.
The setting menu display appears.
Simple Mode On
Setting User Memory :
Network Mode :
SSID :
Network Channel :
Data Encryption (WEP) : 128 (104) bit HEX
Key :
IP Address Setting :
IP Address :
Subnet Mask :
Ok
Default Gateway :
MAC Address :
Cancel
5
Select [Off] in [Simple Mode] and set
.
[Setting]
User Memory: the setting items can be
saved. There are five memories and you
can select from among [User 1] to [User
5]. When you want to change the user
memory name, see "Projector setting"
on page 18 ("Setting/Operating via
Web").
Network Mode: select [Ad-hoc (Peer-to-
peer)] or [Wireless Access Point].
• Ad-hoc (Peer-to-peer): for wireless
LAN connection without the access
point
• Wireless Access Point: for wireless
LAN connection with the access point
SSID: enter the same network name as that
of the connected computer or access
point.
A maximum of 32 characters/numbers
can be entered.
Ad-hoc (Peer-to-peer)
SONYPJ00000
11
**************************
Manual
169. 254. 50. 50
255. 255. 0. 0
01-23-45-67-89-AB