Advertisement
Gesture control is not working
Gesture control can be used for some, but not all, Android apps and features.
•
Make sure your device is in Android mode. Gesture control is not supported when
you are projecting from an external source via HDMI.
•
Make sure there is enough light for Gesture control to function properly. The
camera cannot detect your hand if the room is too dark.
•
When you make gestures using only your fingers, make sure the rest of your hand
remains still. Refer to the User guide for more information on how to use Gesture
control.
The opening screen is upside down
•
When the device is turned on in wall projection mode, the opening screen may
initially be projected upside down. This issue is only temporary. The Home screen
will be projected in the correct orientation.
The screen is too dark when the
device is not plugged in
•
The performance of some functions, such as screen brightness, are affected when
you disconnect the device from the power outlet. The embedded, rechargeable
battery is designed mainly to allow you to move the projector from one place to
another, before plugging the power cable back in. For optimal performance, keep
your device connected to a power outlet.
The camera screen is displayed
upside down
•
If you switch between wall projection and table projection mode while using the
camera, the camera screen will be displayed upside down. Always start the
camera, or any application that uses the camera, in the projection mode that you
want use.
5
Advertisement
