Troubleshooting - Sony WEGA KV-32HQ150K Operating Instructions Manual

Troubleshooting

Problem
No picture, no sound.
Poor or no picture (screen is
dark), but good sound.
Some channels are blank.
Standby indicator flashing.
Good picture, no sound.
No colour on colour
programmes.
Remote control does not
function.
Distorted picture when
changing programmes
selecting teletext.
• If you continue to have these problems, have your TV serviced by qualified
personnel .
• NEVER open the casing yourself.
Possible causes
• Power off.
• TV in standby.
• Aerial disconnected.
• Picture preset level adjustment.
• Scrambled or subscription-only
channel.
• Programme used only for data (no
picture or sound).
• Programme not being transmitted.
• Fault (irregular flash).
• Volume control.
• TV speakers turned 'Off'.
• Colour level setting.
• Batteries low.
• Wrong mode.
• Inputs from external equipment not
switched off.
or
Additional information
Solutions
• Plug in the TV.
• Press the button on the front of the TV.
/
indicator is on press the
• Check aerial connection.
• Select 'Picture Adjustment' menu then adjust the
brightness, picture and colour levels.
• Subscribe to pay-per-view broadcaster.
• See 'Programme sorting' section (refer to page 15).
• Do not open the cabinet, refer to qualified personnel.
• Contact your nearest SONY Service Centre.
• Press the + button on the remote control.
• If is displayed on the screen, press the
the remote control.
• Set TV speakers to 'On' in Sound Adjustment menu.
• Select 'Picture Adjustment' menu then adjust the colour
setting.
• Replace batteries.
Press the > or . button to check if your remote
•
control is in the correct Mode for the equipment you are
trying to control.
• Switch off all additionally connected equipment.
If the
button on the remote control.
button on
23