Icom IC-A220T Instruction Manual page 18

3
MEMORY OPERATION
D Selecting channel tag names
(For only group memory channels)
The tag name can be set to a three character name, in
addition to the group number. It is convenient for separating
memory types.
q Push [RCL] to enter the memory mode, and then rotate
[O-DIAL] to select group memory channel.
w Push [DIAL] and then rotate [O-DIAL] to select a
memory group from GRP01 to GRP05.
• Push [DIAL] again to set the memory group.
e Push [MEM] and then rotate [O-DIAL] to select "CH TAG."
r Push [MEM] and then rotate [DIAL] to select a channel
tag.
• The tag name shown to the right is selectable.
t Push [MEM] to set the channel tag.
y Hold down [RCL],or push [RCL] twice to exit the memory
mode.
11
GRP01
122.00 127.00
5
CH01 TWR
Channel tag list
DISPLAY
TAG
NAME Group*
1
_ _ _ YES
TWR YES
GND YES
ATS YES
ATF YES
APP YES
ARR YES
AWS YES
CLR YES
CTF YES Common Traffic Advisory Frequency
DEP YES
FSS YES
RFS YES Remote Flight Service Station
UNI YES
MF YES
OTH YES
U-1 YES
U-2 YES
* 1 Group memory
About U-1/U-2
You can edit tag names of U-1 and U-2 in the Configuration
menu. See page 23 for details.
MEANS
Non-tag
Tower
Ground
ATIS
Air traffic
Approach
Arrival
Automatic Weather Station
Clearance / Delivery
Departure
Flight Service Station
Unicom frequency
Mandatory frequency
Other
User1 setting (p. 23)
User2 setting (p. 23)