Waterlase Express Cart — Instructions for Use Introduction The Waterlase Express Cart was designed for the specific and exclusive use of the Waterlase Express all-tissue dental laser system and its accessories. It has been designed for transporting Waterlase Express within the dental office environment and also to facilitate the arbitrary positioning of the laser system for optimal use.
Unpacking CAUTION: At this time, there will be no The Waterlase Express Cart comes in one shipping weight on the table top and the gas spring box. Use care when opening. Contents Include: within the column will have a positive force to it, resulting in the table top rising with force.
Page 4
Handle Handle Assembly Table Top No Push Label (Both Sides) Max Load Label 1.5kg labels (x4) Figure 2: Waterlase Cart and Handle Assembly Drawers Cart Max Load & Height Adjustment Label Rubber Cable Clips Table Height Adjustment 2-Cable Winders Power Cable/ Air Hose Product ID Label Rubber Cable Clips 4-Locking Wheel Casters...
Care should be taken to observe that there are four (4) debossments in the table top The Waterlase Express Cart has been fitted with surface intended for the feet of the laser console, four (4) twin wheel casters with brakes on each which allows it to sit securely on the table top, caster.
Page 6
The table top is automatically locked into position, Bottom unless the black actuator lever is activated. When the lever is activated, the table top can be moved up or down with minimum effort. • From the back of the cart, locate the black actuator lever under the table top.
Section 7: Labels Wheel Casters There are four (4) locking wheel casters located on Product ID Label the bottom of the cart. The casters should be kept Location: Side of cart locked at all times when the cart is not being moved for maximum stability.
Need help?
Do you have a question about the Waterlase Express Cart and is the answer not in the manual?
Questions and answers