Table of Contents
Advertisement
O
perations
Carpet cleaning continued
7. Cleaning strokes. Release the trigger
and make one slow forward and back-
ward pass over the same area to remove
any residual dirty water and aid in drying.
Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the trigger until you can't
see any more water being pulled up.
8. Remove the dirty water tank by pulling the
handle to the upright position and lift up.
Carry the tank like a bucket to a utility sink
or outside where you will dispose of the
dirty water.
9. Unlatch the top of the tank from the bottom
by pushing the handle all the way forward
and lifting the top off. Pour dirty water into
the sink.
NOTE: You may notice hair and
debris deposits on the carpet or
in the tank that were loosened by
the cleaning action (especially with
newer carpets that have never
been deep cleaned before). This
debris should be picked up and
thrown away.
10. Fill the clean water tank with clean hot
tap water and follow instructions 2 - 7 to
continue cleaning.
8
www.bissell.com.au
8.
9.
9.
CAUTION:
Do not overwet. Take care not
to run over loose objects or
edges of area rugs. Stalling
brush may result in premature
1.800.811.183 / 0800.247.735
Advertisement
Table of Contents
