Overview Of Remote Control Buttons - Sony GRAND WEGA KF-50SX300U Operating Instructions Manual

Overview of Remote Control Buttons

1
wf
wd
2
ws
3
4
wa
5
w;
ql
6
7
qk
8
qj
9
qh
q;
qg
qf
qd
qa
qs
9 a) Displaying a channel index: if Media Selector
(w;) is switched to TV and MENU is switched off,
press OK to display a channel overview. If you
want to select a channel, press
again the OK button to watch the selected channel.
b) Navigator: if Media Selector (w; ) is switched to
TV and MENU ( qs) is switched on, use these
buttons to navigate through the menu system of the
TV. Refer to page 12.
q; Selecting the screen format: press this button
repeatedly to change the format of the screen. Refer
to page 16.
qa Selecting broadcast channels: press these
buttons to select the next or previous broadcast
channel.
qs Menu system: press this button to enter the TV
menu system. Refer to page 12.
qd Adjusting volume: press these buttons to increase
or decrease the audio volume.
qf Selecting picture mode: press this button
repeatedly to change the picture mode. For details on
the different picture modes. Refer to page 13.
qg Selecting the sound effect: Press this button
repeatedly to change the sound effect. For details on
different sound effects. Refer to page 14.
qh Fastext: In Teletext mode, these buttons can be
used as Fastext buttons. For details see page 22.
1 TV I/ : To Temporarily Switch Off TV (standby mode):
Press this button to temporarily switch off TV (the standby indicator
lights up). Press again to switch on TV from standby mode.
• To save energy we recommend switching off completely when TV is not in
use.
• After 15 minutes without TV signal and without any button being pressed,
the TV switches automatically into standby mode.
2 VCR or DVD on/off: press this button to switch your VCR or DVD on or off.
3 Selecting input source: press this button repeatedly until the desired input symbol
of the source appears on the TV screen. Refer to page 25.
4 Selecting broadcast channels: if Media Selector (w; is switched to TV, press
these buttons to select channels. For double-digit programme numbers, enter the
second digit within 2.5 seconds.
5 Selecting VCR double-digit: if Media Selector (w;) is switched to VCR, press this
button to select double-digit channels for Sony's VCR e.g. 23, press -/-- first and next
the buttons 2 and 3.
6 a) Recording button:
If Media Selector (w;) is switched to VCR, press this button to record programmes.
b) Resetting to factory set levels:
Press, for a minimum of 3 seconds, to return the picture and sound settings to the
factory default levels. This will also return the set to the install condition and the
"Auto Tuning" menu will appear on the screen. If this is the case refer to the
section "Switching on the TV set and automatically Tuning" (page 11, step 5) of
this manual.
7 Watching last channel selected: if Media Selector (w;) is switched to TV, press
this button to return to the previous channel you were watching (provided you
watched it for at least 5 seconds).
8 Freezing a teletext page: in teletext mode, press this button to freeze a teletext
page. Press it again to cancel the freeze.
v V
or next press
qj NexTView: press this button to display NexTView.
For details. Refer to page 23.
qk Teletext: press this button to switch on Teletext. For
details see page 22.
ql Operating VCR or DVD: if Media Selector (w;) is
switched to VCR or DVD, these buttons will operate
the main functions of your VCR or DVD, once the
remote control has been programmed. Refer to page
26.
w; Media Selector: press this button to select which
device you want to operate, TV, VCR or DVD. A
green light will be momentarily lit to show which one
you have selected. For details refer to page 26.
wa Displaying Info: press this button to display all on-
screen indication such as channel number, etc. Press
again to cancel.
ws Selecting TV mode: press this button to switch off
PAP, Teletext or Video input mode.
wd PAP (Picture And Picture): press this button to
divide the screen into two for watching two channels
simultaneously. Refer to page 21.
wf Muting the sound: press this button to mute the
TV sound. Press again to restore the sound.
Overview & Installation
on the TV
GB
7