The Picture Adjustment Menu - Sony GRAND WEGA KF-50SX300U Operating Instructions Manual

The Picture Adjustment Menu

Picture Adjustment
Picture Mode: Live
Contrast:
Reset
Noise Reduction: On
Colour Tone: Cool
Select: Enter: Exit:
OK MENU
Picture Mode This option allows you to customise the Picture Mode based on the programme
"Brightness", "Colour" and "Sharpness" level of "Live" and "Movie" mode are fixed on the
factory to get the best picture quality.
Contrast
Brightness
Colour
Hue
Sharpness
Reset
Noise
Reduction
Colour Tone
Lines
Correction
• "Brightness" "Colour" and "Sharpness" only appears and only can be altered if "Picture
mode" is set to "Personal".
• "Hue" only appears and only can be altered for NTSC signal (e.g. USA video tapes).
• For an RGB input signal connected to the PC
altered: "Contrast", "Brightness" and "Lines Correction".
.
Picture Adjustment
Picture Mode: Live
Contrast:
Reset
Noise Reduction: On
Colour Tone: Cool
,
Lines correction: 0
Enter:
Back: Select:
you are watching. After selecting this option press OK. Next press repeatedly
V
or to select:
Personal (for individual settings).
Live (for live broadcast programmes, DVD and Digital Set Top Box receivers).
Movie (for films).
Once you have selected your desired option, press OK to store.
B b
Press or to reduce or enhance picture contrast. Next press OK to store.
B b
Press or to darken or brighten the picture. Next press OK to store.
B b
Press or to decrease or to increase color intensity. Next press OK to store.
B b
Press or to decrease or to increase the green tones. Next press OK to store.
B b
Press or to soften or to sharpen the picture. Next press OK to store.
Press OK to reset the picture to the factory preset levels.
This option is set to On to automatically reduce the snowy picture
visible in the broadcast signal. To cancel this function, press
This option allows you to alter the tint of the picture. After selecting this option
b
press . Next press repeatedly
a red tint), Normal (gives the white colours a neutral tint), Cold (gives the white
colours a blue tint). Next press OK to store.
While viewing an RGB input signal from the PC
lines may be not correctly displayed. To correct this problem, select this option
b
and press . Next press repeatedly
Finally press OK to store.
The "Picture Adjustment" menu allows you to
alter the picture settings.
To do this:
Press the MENU button and then press OK to
enter this menu. Next press
desired option and press OK. Finally read below
how to operate into each option.
OK
v V
or to select: Warm (gives the white colours
v V
or to correct it berween -20 and +20.
connector, only appear and only can be
v V
or to select the
v
v V
or to select Off.
connector, some picture
13
TV Functions
GB