Canon PowerShot A510 User Manual page 30

Preparing the Camera
Icons Displayed in Playback Mode
(Detailed Display)
Shooting Mode
*1
Exposure
Compensation
White Balance
Photo Effect
ISO Speed
Flash
Macro Mode
Manual Focus
Metering Mode
Resolution (Movies) p. 40
* 2 Low Battery
In addition to the above, the shutter speed,
aperture value, histogram and recorded movie time
are displayed as in the example in the figure on
page 27.
1
* : Each mode of the SCN mode icon appears (p. 51).
2
* : appears even in No Display mode.
28
The following information may also appear with
some images.
An audio file other than a WAVE file, or a file
p. 38, 76
with unrecognized format, is attached.
JPEG image not conforming to Design rule for
Camera File System Standards.
p. 83
RAW image.
p. 84
Unrecognized data type.
p. 88
p. 87
p. 42
p. 44
p. 91
p. 82
p. 17
The on/off setting of the LCD monitor
display mode is memorized when the
camera is turned off. When the camera is
turned on again it assumes the last mode.
However, when the LCD monitor is turned
on and the "Change the batteries" message
appears, the LCD monitor may not
automatically turn on the next time the
camera is started.
While a recorded image is displayed on the
LCD monitor, you can check the exposure
with the graph (see About the Histogram
(p. 29)) that shows the distribution of the
brightness data. If the exposure requires
adjustment, set the exposure compensation
and re-shoot. (Press the DISP. button if the
histogram and other information are not
shown.)