Canon PowerShot A510 User Manual page 111

1
Install the driver and the software
applications bundled on the Canon
Digital Camera Solution Disk (first
time only).
Please see the Software Starter Guide for the
installation procedures.
With a Macintosh, it is next necessary to set
the ImageBrowser auto start settings. Please
see the Software Starter Guide for details.
2
Use the supplied interface cable to
connect the computer's USB port
to the camera's DIGITAL terminal.
USB port
Interface cable
DIGITAL Terminal
1. Open the terminal cover
2. Hold the USB connector with
Always grasp the connector's
sides to remove the interface
cable from the camera's
DIGITAL terminal.
3
Slide the camera's mode switch to
.
4
Press the Power button until the
power lamp lights green.
Various Functions
with your finger nail.
the side facing the front of
the camera and insert it into
the DIGITAL terminal
securely.
109