Canon PowerShot A510 User Manual page 133

It takes approximately 110 minutes when
two batteries are loaded one at each end of
the charger and 250 minutes with four for
the charger to fully recharge them (as
determined by testing at Canon facilities).
Please do not charge batteries in areas
where the temperature is outside the range
of 0 to 35°C (32 to 95°F).
Charging time varies according to ambient
temperature and to the batteries' initial
charge state.
The battery charger may emit noise while
charging. This is not a malfunction.
Battery/Charger Kit CBK100 can also be
used. Use Canon AA-size batteries NB-
1AH with the charger included in the CBK
100 kit.
Using the AC Adapter Kit ACK800
Use of AC Adapter Kit ACK800 (sold separately) is
recommended when using the camera
continuously for prolonged periods of time and
when connecting to a computer.
Be sure that the camera is turned off before
connecting or disconnecting the compact
power adapter.
1
Connect the power cord to the
compact power adapter, and then
plug the other end into the power
outlet.
Appendix
To a power outlet
131