Canon PowerShot A510 User Manual page 124

List of Messages
RAW
Unidentified Image
Cannot magnify !
Cannot rotate
Incompatible WAVE
format
Cannot register this
image !
Protected !
Too many marks
Unselectable image
Cannot complete !
Exx
122
You attempted to play back a RAW image.
You attempted to play back an image that was recorded in a special data type
(proprietary data type used by the camera of another manufacturer, etc.) or a movie
recorded by another camera.
You attempted to magnify an image recorded in a different camera or data type, an
image edited with a computer, or a movie.
You attempted to rotate an image recorded in a different camera or data type, an image
edited with a computer, or a movie.
A sound memo cannot be added to this image since the data type of the existing sound
memo is incorrect.
You attempted to register an image recorded in a different camera or a movie as a start-
up image.
You attempted to erase a protected image or movie.
Too many images have been marked for printing or transferring. Cannot process any
more.
You attempted to set the print settings for a non-JPEG image.
Could not save the print or transfer settings.
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or play
back. If the same message recurs frequently, the camera may be damaged. Note the
error number [xx] and take the camera to a Customer Support Help Desk. If this
message appears immediately after you have taken a shot, the camera may not have
shot the image. Switch to the Playback mode and check whether the image was
actually recorded.