Using The Appliance - Philips AVENT SCD603 User Manual

insert the appliance plug into the parent unit
4
and insert the adapter into an electrical outlet.
•
The battery/power-on light on the parent
unit lights up green and the animated
battery charging image appears at the top
of the video display.
•
When the battery is fully charged, the
battery symbol at the top of the video
display is full.
•
When you charge the parent unit for
the first time or after a long period
of disuse, turn it off and let it charge
continuously for at least 4 hours.
• Charging normally takes 2.5 hours, but
it takes longer when the parent unit is
turned on during charging. To keep the
charging time as short as possible,
turn off the parent unit during charging.
•
When the rechargeable battery is fully
charged, the parent unit can be used
cordlessly for approx. 7 hours if it is
in voice activation mode. if the video
display is on continuously, the parent unit
can be used cordlessly at default setting
for approx. 5.5 hours.
6
Note:
D
•
When the parent unit is charged for
the first time, the operating time is less
than 7 hours. The rechargeable battery
only reaches its full capacity after four
discharging and charging cycles.
•
The battery gradually discharges, even
when the parent unit is turned off.

4 Using the appliance

Place the parent unit and the baby unit in the
1
same room to test the connection.
> 1 . 5
Make sure the baby unit is at least 1.5 meters
(5 feet) away from the parent unit.
Set the on/off switch on the baby unit to
2
the ON position.
•
The green power-on light goes on.
5 f t
m /