Rain elite 9 VDC Instructions Manual page 24

IRRIGATION PLANNING
The ELITE control allow to program every single station
with independent start time, irrigation duration and
irrigation days.
Step 1: Start time setting
SPA
Start time is the time the irrigation will begin for the
station.
Turn the dial to "ZONE 1".
The "HOUR" will fl ash. Use + or – buttons to adjust if
required and press ENTER button to confi rm and the
"MINUTES" will fl ash. Use + or – buttons to adjust if
required.
Press ENTER to confi rm and move to the next frame.
24
PROG
A
START TIME
Step 2: Duration setting zone
SPA
This is the length of time that each station (valve) is
scheduled to water.
"0" will be fl ashing. Increase or decrease by using +
or - button. (the minimum duration is 1 minute and the
maximum 240 minutes).
Press ENTER to confi rm and move to the next frame.
Please note that if the duration of a zone is set to
0, the valve will remain closed and watering will not
occur.
RAIN s.p.a.
via Kennedy 38/40
20023 Cerro Maggiore
ITALY (MI)
PROG
A
DURATION ZONE