Table of Contents
Advertisement
Fault
flashes.
lights up.
flashes.
All other error codes.
The appliance is not
working.
The programme does
not start.
Cause and troubleshooting
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 39
▶
Water level is too high.
Start the Drain programme.
▶
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Reload to start the programme.
4.
Door is not closed.
Close the door.
1.
Press Start/Reload to start the programme.
2.
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 63
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed Start/Reload.
Press Start/Reload.
▶
Door is not closed.
Close the door.
1.
Press Start/Reload to start the programme.
2.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 40
▶
Finish in is activated.
Check whether Finish in is activated.
▶
→ "Buttons", Page 23
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Troubleshooting en
53
Advertisement
Table of Contents
