Buttons; Programmes - Siemens WAU28S80GB User Manual And Installation Instructions

Table of Contents

Advertisement

Buttons

7 Buttons
The selection of programme settings depends on the programme that is set.
Buttons
You can see the selection options for each programme in the overview for
→ "Programmes", Page 25.
Button
Start/Reload
SpeedPerfect
i-DOS
Finish in
Temp. °C
Spin Speed
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
¡ Activate
¡ Deactivate
¡ Basic dosage
1–24 hours
– 90 °C
- -  - - - 1400
Description
Start, cancel or pause the pro-
gramme.
Activate or deactivate a short washing
programme.
Note: Energy consumption increases.
The washing result is not affected by
this.
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener
tergent .
Press the button for approx. three
seconds to set the basic dosage.
→ "Intelligent dosing system",
Page 40
Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Note: Use the button to adjust the ba-
sic dosage.
→ "Adjusting the basic dosage",
Page 41
Adjust the temperature in °C.
Adjust the spin speed or activate - -  -
 - (Rinse Hold).
If - -  - - is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the water
used for rinsing.
Note: Use the button to adjust the ba-
sic dosage.
→ "Adjusting the basic dosage",
Page 41
Buttons en
or liquid de-
23

Advertisement

Table of Contents
loading

Table of Contents