Before Installing The Product (Installation Guide); Tilting Angle And Rotation; Ventilation - Samsung OH55A-S User Manual

Before Installing the Product
(Installation Guide)
15 ˚
A
B
Figure 1.1 Side view
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•
•
•
If the product temperature increases due to high outside temperature or the environment in which the product is installed, the
luminance decreases for product overheating mitigation and accident prevention.

Tilting Angle and Rotation

― Contact Samsung Customer Service Center for further details.
• The product can be tilted at a maximum angle of 15° from a perpendicular wall surface.
• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.

Ventilation

Air intake
Installation on a Perpendicular Wall
A Minimum 50 mm
B Ambient temperature: Under 50°C
• When installing the product on a perpendicular wall, allow at least 50 mm of space between the product and wall surface
for ventilation and ensure that the ambient temperature is kept below 50°C.
― Do not block the vent on the product.
― Refer to the Outdoor Installation Guide. (http://displaysolutions.samsung.com)
Air vent
Ensure that an authorized installation company installs the wall mount.
Otherwise, it may fall and cause personal injury.
Make sure to install the specified wall mount.
17