TO START –
Your recorder is now ACTIVE and will begin recording.
TO STOP - Open Logtag Analyser on the computer and plug in the
Pre-start recorder is utilised if you would like the LogTag to start
taking readings BEFORE you press the start button (usually not
used- remove arrow )
Frequency of readings will directly affect the duration of readings
the recorder can take, typically 8000.
The temperature parameters you set only dictate when the alert
indicator will show and does not affect the recorders reading
capacity.
Passwords are not readily retrievable if forgotten.
NB: ADVANCED Options should not be attempted without studying the
Logtag analyser USER guide thoroughly. (HELP- menu in Analyser – top
Kindly read the user guide on Logtag Analyser, under the HELP
Tel: 021 852 7686
Push and hold down the „start/mark‟ until the red
and green/ starting display indicators flash rapidly
and then release.
USB Logtag. The graph, report, data table, etc will
displayed AND automatically saved to:
>documents>My LogTag Data)
CONFIGURATION NOTES
left)
menu.
Fax: 086 664 7173
43 Bright street, Somerset West, 7129
Email: info@logtagdata.com
Need help?
Do you have a question about the USRIC-4 and is the answer not in the manual?