Step 3: Configure/Set Up; Step 4: Continue Configuration - LogTag Recorders USRIC-4 Software Download And Quick Start Manual

A blank screen will re-appear with a menu bar along the top.
Click on LogTag on the top menu and select „Configure‟ in the drop
down menu.
The program will automatically „Locate LogTag‟ (
Click Next for the Arrow to move down to configure Logtag.
You will now be on Step 2 of the programme > „Configure‟.
Continue through the options and configure the LogTag to your
personal requirements
(Suggestions)
 Name your LogTag for identification purposes in the user ID
field.
 Disable pre-start logging, unless required.(tick the box- it will
clear)
 Set your reading intervals to suit your requirements and
recording duration.
 Activate a reading delay (15- 30 minutes) to allow the recorder
to acclimatise, if required
 Set your alert parameters to suit your requirements.
 The consecutive reading setting "delay", allows for defrost cycles
etc, in an effort not to send "false" alerts for brief excursions.

- After configuration click „Next' – wait for command and click „Next‟
to ensure LogTag is ready for use.
- Wait for the space bar to show 100% to ensure your LogTag has
accepted the configuration. _ You can remove the Logtag NOW.
Tel: 021 852 7686
Step 3: (Configure/ Set up)
Step 4:
Fax: 086 664 7173
43 Bright street, Somerset West, 7129
Top left screen)
Email: info@logtagdata.com