Table of Contents
Advertisement
For more information
on STATUS LED, refer
to page 53.
Warning Indicator
When the "STATUS" LED
indicates the projector has overheated. The projector will
automatically shut itself down.
WARNING! TEMPERATURE TOO HIGH
1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.
2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C
When the "LAMP" LED
below displays on-screen, the projector has detected that
the lamp is approaching its end of
message, change the lamp as soon as possible.
WARNING! LAMP
LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!
WARNING! LAMP
LAMP WARNING
PLEASE REPLACE THE LAMP.
When the "STATUS" LED
message below displays on-screen, it indicates the fan failed.
Stop using the projector and disconnect the
the electrical outlet, then contact your local dealer or our
service center.
WARNING! FAN LOCKED
THE PROJECTOR WILL SWITCH OFF AUTOMATICALLY.
Installation
indicator flashes red, it
indicator turns red and the message
life. When you see this
indicator flashes red and the
power cord from
23
... English
Advertisement
Table of Contents
Troubleshooting
