U300X Installation Guide
Desktop and Ceiling Mount
Product Description, Lens Specs, Notes and Formulas
Diagrams and Distance Charts
Ceiling Mounted Installation
Top, Front and Right Side
Bottom, Back and Left Side
Optional Wall Mount Dimensions
Optional Wall Mount Dimensions cont.
Input Panel and Control Codes
1 chip DMD
1024 x 768 (1024x576 for 16:9 screens)
Power Consumption: 360W (max)
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for "W" in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
W = Screen width
H = Screen height
A = Distance between projector cabinet and screen
B = Vertical distance between projector foot and screen center
C = Throw distance
D = Vertical distance between projector foot and screen bottom
(screen top for ceiling mounted application)
A = C-13.48
B = 0.631W
C = 0.377W
D = 0.256W
Ultra Short Throw projector
NEC Display Solutions of America, Inc.
Screen Range: 63" – 85" Diagonal (4:3)
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
Screen Diagonal = W x 5/4
16:9 Screen Formulas:
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.868/16
16.8"(W) x 7.9"(H) x 16.0"(D)
36 dB / 32dB @ 1 meter
Page 1 of 8