NEC NP-U321H User Manual page 60

Power Indicator
Indicator Condition
Off
Blinking GREEN 0.5sec ON / 0.5sec OFF
light
GREEN 2.5sec ON / 0.5sec OFF
ORANGE 0.5sec ON / 0.5sec OFF
Steady
GREEN
light
ORANGE
RED
Status Indicator
Indicator Condition
Off
Blinking RED 2cycle (0.5sec ON /
light 0.5sec OFF)
3cycle (0.5sec ON /
0.5sec OFF)
4cycle (0.5sec ON /
0.5sec OFF)
6cycle (0.5sec ON /
0.5sec OFF)
Steady RED
light
Lamp Indicator
Indicator Condition
Off
Blinking RED 0.5sec ON / 0.5sec OFF
light
Steady RED
light
Problem: LED lighting message
Appendices
Projector Condition
The main power is off.
The projector is getting ready
to turn on.
Off Timer is enabled.
Cooling
Power on mode
Network Standby mode
Normal Standby mode
Projector Condition
Normal Condition
Temperature error
Power error
FAN error
Lamp error
Control Panel Lock is working You have pressed cabinet
Projector Condition
Normal Condition
Lamp has reached its end of
life.
Lamp has been used beyond
its limit.
Note
Without connecting power
cable.
Wait for a moment.
--
--
--
Connecting power cable.
Connecting power cable.
Note
--
The projector is
overheated. Move the
projector to a cooler
location.
Power unit is not working
properly. Contact your
dealer.
Fans do not work correctly.
Lamps fail to light. Wait a
full minute and then turn
on again.
button when Control Panel
Lock is on.
Note
--
--
The projector will not
turn on until the lamp is
replaced.
53 ... English