Table of Contents
Advertisement
Plena Weekly Timer | Installation and User Instructions | Configuration software
8. 1 0
Modify password
Use the Modify password button to modify the
password for accessing the software.
1 From the main menu, click the Modify password
button. The following window will appear
(see figure 8.20).
figure 8.20: Enter password window
2 Type in the current password, and then click OK.
The default password is 12345678. The following
window will appear (see figure 8.21).
figure 8.21: Modify password window
3 Type in the new password. The password must have
a minimum of four characters. The password is also
case sensitive. Therefore, pay attention to capital
letters when entering the new password.
4 Confirm the password, and then click OK.
Bosch Security Systems | 2006-05 | 9922 141 50741 en
8. 1 1
Save configuration file
Use the Save configuration file button to save the current
configuration file.
1 From the main menu, click the Save configuration
file button. The following window will appear
(see figure 8.22).
figure 8.22: "Save configuration file as" window
2
Select the area where you want to save the
configuration file, and then click Save
Note
The default filename is based on the date set in
the computer's clock (see figure 8.22).
en | 37
Advertisement
Table of Contents
