Table of Contents
Advertisement
Plena Weekly Timer | Installation and User Instructions | Equipment
3.4.2
Connecting other Plena devices
The following inputs and outputs can be used to connect
the Timer to other Plena devices (see figure 3.7):
•
Audio loop through - Cinch input
•
Audio loop through - Cinch output
•
Audio loop through - XLR input (female)
•
Audio loop through - XLR output (male)
The cinch input and XLR input, as well as the cinch
output and XLR output are connected in parallel (see
figure 3.1).
This means that the Timer can be connected to other
Plena devices, using any combination of audio loop
through inputs and outputs.
For example, the "PLN-DVDT cinch out" can be
connected to the "Timer cinch in", and the "Timer XLR
out" can be connected to the "Mixer Amplifier XLR in"
(preferred set-up). The "Timer cinch out" can also be
connected to the "Mixer Amplifier cinch in".
figure 3.7: Connecting other Plena devices
Bosch Security Systems | 2006-05 | 9922 141 50741 en
PLN-DVDT
PLN-6TMW
en | 15
LBB-1903
Advertisement
Table of Contents
