Table of Contents
Advertisement
Plena Weekly Timer | Installation and User Instructions | Manual settings
6
Manual settings
You can use the controls on the front panel to manually
override programmed events. The Timer will
automatically return to the programmed schedule at the
start of the next event.
6. 1
Selecting a program
The Timer has two weekly schedules that can be
individually programmed (for more information on
programming, see section 7 and 8).
Press the Program buttons 1 or 2 on the front panel to
switch between the two programs. When the program is
selected, the program LED will come on (see figure 6.1).
figure 6. 1 : Selecting a program
6.2
Activating an output contact
The Timer has 6 programmable output contacts for
activating numerous types of equipment (for more
information on programming, see section 7 and 8).
Press one of the Contact buttons (1 through 6) on the
front panel to manually activate an output contact.
When the output is activated, the Contact LED will
come on (see figure 6.2).
figure 6.2: Manually activating an output contact
Bosch Security Systems | 2006-05 | 9922 141 50741 en
6.3
Temporarily pausing events
Press the Pause button on the front panel to temporarily
suspended all events. The word "Paused" will appear in
the display next to the button.
Note
All events will be suspended until the Pause
button is pressed again, and the word "Paused"
is no longer displayed.
6.4
Setting BGM levels
Turn the rotary selector to manually set the BGM levels.
The Timer will then automatically select the
programmed volume at the start of the next event.
6.5
Locking the buttons and
rotary selector
Press and hold in the rotary selector for a number of
seconds to lock all controls of the front panel. This is
useful if you do not want other users to accidently
trigger random events.
The word "Hold" will appear in the bottom right-hand
corner of the display (see figure 6.3).
figure 6.3: Locking the controls of the front panel
Note
All controls will remain locked until the rotary
selector is pressed and held in again for a
number of seconds, and the word "Hold" is no
longer displayed.
en | 21
Advertisement
Table of Contents
