Audio Settings - Kenwood KDC-220UI Instruction Manual

AUDIO SETTINGS

While listening to any source...
1 Press AUD to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
(or using the remote control)
1
Press AUD to enter [AUDIO CONTROL].
2 Press J / K to select an item, then press
AUDIO CONTROL
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+2)
MID LEVEL –8 to +8 (+1)
TRE LEVEL –8 to +8 (+1)
EQ PRO (This setting is stored to [USER].)
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR 1.00/1.25/1.50/2.00: Adjusts the quality factor.
BASS EXTEND
12 ENGLISH
JS_KWD_KDC_220UI_MN_EN_3.indd 12 JS_KWD_KDC_220UI_MN_EN_3.indd 12
.
.
Default: XX
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you
want to adjust.)
60HZ/80HZ/100HZ/200HZ or 60/80/100/200:
Selects the center frequency.
–8 to +8 (+2): Adjusts the level.
ON: Turns on the extended bass. ; OFF: Cancels.
MID ADJUST MID CTR FRQ 0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ: Selects the
center frequency.
MID LEVEL –8 to +8 (+1): Adjusts the level.
MID Q FACTOR 0.75/1.00/1.25: Adjusts the quality factor.
TRE ADJUST TRE CTR FRQ 10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ: Selects the
center frequency.
TRE LEVEL –8 to +8 (+1): Adjusts the level.
PRESET EQ DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL/
USER: Selects a preset equalizer suitable to the music genre.
(Select [USER] to use the settings made in [EQ PRO].)
[DRIVE EQ] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST LEVEL1/LEVEL2/LEVEL3 or LV1/LV2/LV3: Selects your preferred bass
boost level. ; OFF: Cancels.
LOUDNESS LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ;
85HZ/120HZ/160HZ: Audio signals with frequencies lower than
85 Hz/120 Hz/160 Hz are sent to the subwoofer.
SUB-W PHASE REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
6/14/2017 8:59:29 AM 6/14/2017 8:59:29 AM