Display Settings - Kenwood KDC-220UI Instruction Manual

AUDIO SETTINGS
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Preset the initial
volume level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
(Sound reconstruction) components and restoring the rise-time of the waveform that are
lost in audio data compression. ; OFF: Cancels.
• [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] is
selectable only if [SWITCH PREOUT] is set to [SUBWOOFER] or [SUB-W].
( 4)
• [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON]. ( 12)
JS_KWD_KDC_220UI_MN_EN_3.indd 13 JS_KWD_KDC_220UI_MN_EN_3.indd 13

DISPLAY SETTINGS

Zone identification for color and brightness settings
Zone identification for brightness settings
Set the dimmer
Press and hold DISP to turn on or off the dimmer.
• If you have set [DIMMER TIME] ( 14), it will be canceled once you press
and hold this button.
Other settings
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 14), then press the
knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
.
ENGLISH 13
6/14/2017 8:59:29 AM 6/14/2017 8:59:29 AM