Table of Contents
Advertisement
Winter Storage
The machine should be readied for storage at the
end of the mowing season or if it will not be in use for
longer than 30 days.
Fuel allowed to stand for long periods of time (30 days
or more) can leave sticky residues that can plug the
injector and disrupt engine function.
Fuel stabilizers are an acceptable option as regards
to the sticky residues that can occur during storage.
Add stabilizer to the fuel in the tank or in the storage
container. Always use the mixing ratios specified by
the manufacturer of the stabilizer. Run the engine for
at least 10 minutes after adding the stabilizer so that
it reaches the injector. Do not empty the fuel tank and
the injector if a stabilizer has been added.
WARNING!
Never store an engine with fuel in the
tank indoors or in poorly ventilated
spaces where fuel vapor can come
in contact with open flames, sparks,
or a pilot light such as in a boiler, hot
water tank, clothes drier, etc. Handle
the fuel with care. It is very flammable
and can cause serious personal injury
and property damage. Drain the fuel
outdoors into an approved container
and store far away from open flame.
Never use diesel fuel for cleaning. Use
a degreaser and warm water.
STORAGE
To ready the machine for storage, follow these steps:
1. Thoroughly clean the machine, especially under
the mower deck. Touch up damage to the paint
and spray a thin layer of oil on the underside of
the mower deck to avoid corrosion.
2. Inspect the machine for worn or damaged parts
and tighten any nuts or screws that may have
become loose.
3. Change the engine oil; dispose of properly.
4. Empty the fuel tanks or add a fuel stabilizer. Start
the engine and allow it to run until the injector is
drained of fuel or the stabilizer has reached the
injector.
5. Lubricate all grease zerks, joints, and axles.
6. Remove the battery. Clean, charge, and store the
battery in a cool place, but protect it from direct
cold.
7. Store the machine in a clean, dry place and cover
it for extra protection.
Service
When ordering spare parts, please specify the
purchase year, model, type, and serial number.
Always use genuine Dixon spare parts.
An annual check-up at an authorized service
workshop is a good way to ensure that the machine
performs its best the following season.
57
Advertisement
Table of Contents
