Table of Contents
Advertisement
03_14
Downloaded from StockCheck.com
Unused Functions
The Multimeter function that is not utilized (disabled) when
the OMH-6722B is attached are shown to the right. If a
disabled button is pushed, the 6810B will display the error
code E-715.
All other switch functions perform as described in the OMM-6810B Instruction
Manual.
Error Display
Execution errors are indicated on the right display. Errors are shown as "E-xxx"
where xxx is a three digit number representing the unique error. Errors are
displayed for three seconds or until the error causing condition is remedied,
whichever is longer. See Appendix A in the OMM-6810B Instruction Manual for a
detailed list of error messages.
Rear Panel Connections
The OMH-6722B interfaces with the rear panel of the multimeter as described in
the following paragraphs.
Input Connector
The OMH-6722B interfaces the Multimeter via the 26-pin high density "D"
connector located on the lower left side of the rear panel. Do not attach or remove
the head while power is applied to the Optical Multimeter. Please turn the power
switch off when changing optical measurement heads.
Front Panel Controls
INPUT
Figure 2.2 Rear Panel Input
O P E R A T I O N
C H A P T E R
OMH-6722B
2
7
Advertisement
Table of Contents
