Table of Contents
Advertisement
Troubleshooting
Problem
Sound is not played back
from the built-in speaker
of this unit.
Although this unit is
correctly connected to a
TV, playback images
cannot be seen.
Scenes cannot be deleted
or edited.
Even if a disc is
formatted, it cannot be
used.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
"PUSH THE RESET
SWITCH." is displayed.
88
LSQT1040
≥ Is the volume too low?
# During playback, move the volume lever to display the
volume indication and adjust it. (l 54)
≥ Have you selected video input on the TV?
# Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥ Is the DVD-RAM or the DVD-RW (VR format) write-
protected?
# Release the protection. (l 72)
If the disc or the contents on the disc have been protected on
another device, release the protection on the same device.
≥ It may not be possible to delete scenes that have been
divided.
# Combine the divided scenes, and then delete them. (l 59)
≥ Scenes displayed as thumbnails in shades of blue and
white may not be deleted. If the scenes are unnecessary,
format the disc to erase the data. (l 69) Please be aware
that if a disc is formatted then all the data recorded on the
disc will be erased.
≥ Either this unit or the disc may be damaged. Please
consult a dealer.
≥ Turn off the power to this unit. If the power cannot be
turned off, press the RESET button, or remove the battery
or AC adaptor and then reattach it. After that, turn on the
power again. If normal operation is still not restored,
detach the power connected, and consult the dealer who
you purchased this unit from.
≥ The unit has automatically detected an
error. Press the RESET button with the
projecting part of the lens cap. This will
restart the unit.
≥ If you do not press the RESET button,
the power to this unit is turned off automatically about 1
minute later.
≥ Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the
appliance by yourself.
Check points
Hide quick links:
Advertisement
Table of Contents
