Power Supply Preparations : Headphones; Using The Rechargeable Batteries (Supplied) - Panasonic RP-WH5000-S Operating Instructions Manual

Control reference guide
Transmitter's rear panel
0 dB
ATT
-8 dB
L
LINE IN
R
DIGITAL IN
OPT
DC IN 6V
Headphones
Ear pad (left)
Infra-red
signal sensor
Located on both left and right
sides of the headphones.
Left housing
Battery compartment lid
( page 7)
BATT button ( page 7)
Press to open the battery compartment lid.
Use the supplied rechargeable
6
batteries or "R6/LR6, AA" dry cell
batteries.
6
ATT control ( page 11)
Switch to [0 dB] when sound from an analog
input is low. The standard setting is [-8 dB].
LINE IN terminal ( page 10)
To connect to the audio out terminals of AV
equipment such as a video cassette recorder or
television (sold separately).
DIGITAL IN terminal ( page 9)
To connect to digital equipment such as a DVD
player (sold separately).
DC-IN 6V terminal ( page 7)
To connect to the supplied AC adapter.
(Use only the supplied AC adapter. Use of other
AC adapters with, for example, a different plug
polarity is dangerous and can damage the unit)
Free-adjusting band ( pages 8,14)
The power turns on automatically when
you put on the free-adjusting band.
Ear pad (right)
Right housing
POWER lamp
Pull up the free-adjusting band and
check that the POWER lamp glows
red. You can now use the headphones.
VOL control ( page 12)
To adjust the volume.
( page 8)
Charging terminal

Power Supply Preparations : Headphones

Using the rechargeable batteries (supplied)

The supplied rechargeable batteries must be charged before using this unit.
Inserting the supplied nickel-metal hydride rechargeable batteries
BATT button
Rib
Charging
Transmitter
To household AC outlet
AC adapter
AC120 V
(supplied)
AC adapter
power cord
To DC-IN 6V terminal
(supplied)
Nickel-metal hydride rechargeable batteries
Use the supplied batteries or replacement batteries
(RFKFHR162SA4).
Dry cell batteries
You cannot charge dry cell batteries.
1
Press [BATT] on the right housing. The
battery compartment lid will open.
Do not take off the battery lid.
2
Insert the supplied nickel-metal hydride
rechargeable batteries.
• Align the poles and correctly when
inserting.
• Push down on the pole spring when
inserting.
Remove the pole first when removing.
3
Close the battery compartment lid.
Insert the rib in the hole and close the battery
compartment lid.
Push until it locks.
1
Connect the AC adapter (supplied) to the
transmitter.
7
7