Advertisement
Quick Links
MAS90: 5043-43240
SUMMIT BED FRAME HARDWARE
QTY:
8
100MM DECORATIVE HEAD LAG BOLTS
1
4MM ALLEN WRENCH
10
6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW
4MM POWER DRILL DRIVER
1
ASSEMBLY: 1 PERSON AND 30 MINUTES
TOOLS:
1)
4 mm Allen Wrench (INCLUDED)
2)
4 mm Allen Drill Bit
(Be sure to FULLY SEAT bit into bolt head before turning)
3)
Phillips Head Screwdriver
*We recommend using a power driver with the drill bit if available*
BE SURE THAT LAG BOLTS ARE STARTED INTO THE HOLES ON THE FRAME RAILS DURING ASSEMBLY.
DO NOT FULLY TIGHTEN UNTIL ASSEMBLY IS LOOSELY COMPLETE.
DESCRIPTION:
7030-00453 KIT
Advertisement
Related Manuals for Living Spaces SUMMIT 7030-00453
Summary of Contents for Living Spaces SUMMIT 7030-00453
- Page 1 7030-00453 KIT MAS90: 5043-43240 SUMMIT BED FRAME HARDWARE QTY: DESCRIPTION: 100MM DECORATIVE HEAD LAG BOLTS 4MM ALLEN WRENCH 6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW 4MM POWER DRILL DRIVER ASSEMBLY: 1 PERSON AND 30 MINUTES TOOLS: 4 mm Allen Wrench (INCLUDED) 4 mm Allen Drill Bit (Be sure to FULLY SEAT bit into bolt head before turning) Phillips Head Screwdriver...
- Page 2 Place 3 loose slats into gaps in slat roll, an screw down with wood screws. See Slat installation information on following pages. 3) Add the proper thickness innerspring bunk mattress. See Living Spaces for details.