Simple Setup; Step1 Positioning; Step2 Connecting The Speakers - Panasonic SC-PM39D Operating Instructions Manual

Simple setup

STEP
Speaker
(SB-PM39)
Place the speakers so that the tweeter is on the inside.
STEP
Twist the vinyl tip and pull off.
Right speaker
RQT7509
6
1
Positioning
Tweeter
Main unit Speaker
(SA-PM39D) (SB-PM39)
Caution
Use the speakers only with the
recommended system. Failure to do
so may lead to damage to the
amplifier and/or the speakers, and
may result in the risk of fire. Consult
a qualified service person if damage
has occurred or if you experience a
sudden change in performance.
Do not attach these speakers to walls
or ceilings.
2
Connecting the speakers
Confirm the colors of the tags
on the ends of the cords.
White
Connect cords so tag colors
match the terminal colors.
White
Connect the left (L) side in
the same way.
Copper(White tag)
Silver(Blue tag)
•
Use only supplied speakers
Using other speakers can damage the unit and sound quality will be
negatively affected.
•
Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from falling
if you cannot set them up on an even surface.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
•
Place speakers on flat secure bases.
•
Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with a thick curtain.
•
Keep your speakers at least 10 mm (
proper ventilation.
•
To avoid damage to the speakers, do not touch the speaker cones if
you have taken the nets off.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When the speakers emit strange noise (howling) from a record
player, noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television's demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
Blue Black Red
Red
Black
Blue
Silver(Black tag)
Copper(Red tag)
13
/ ") away from the system for
32
Note
•
Never short-circuit positive (+) and negative (–) speaker
wires.
•
Be sure to connect only positive (copper) wires to
positive (+) terminals and negative (silver) wires to
negative (–) terminals.
Incorrect connection can damage the speakers.
FM ANT
AM ANT
EXT LOOP 75
SUBWOOFER
R L
OUT
AUX
L
OPTICAL
OUT
R
HIGH(6 ) LOW(6 )
SPEAKERS (SB-PM39)
HAUT-PARLEURS
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
P P Y
R B
AC IN