Simple Setup; Making The Connections - Panasonic SC-PT450 Operating Instructions Manual

Simple setup

Making the connections

Connect the AC mains lead only after all other connections have been made.
• Ensure that you have the complete accessories before making the connections.
Conserving power
The main unit consumes a small amount of power, even when it is standby mode (approx. 0.8 W). To save
power when the unit is not to be used for a long time, unplug it from the household mains socket. You will need
to reset some memory items after plugging in the unit.
Connect to the power supply.
BE SURE TO READ THE NOTE ON AC MAINS
LEAD ON PAGE 3 BEFORE CONNECTION.
Note
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
Connect to the speakers.
Attach the speaker-cable stickers to make connection easier.
6 SUBWOOFER
8
RQT8043
To household mains socket
Be careful not to cross (short-
circuit) or reverse the polarity
of the speaker wires as doing
so may damage the speakers.
Do not insert the
wires beyond the
wire insulation.
Speaker-cable sticker
2 FRONT (R)
1 FRONT (L)
4 SURROUND (R)
3 SURROUND (L)
SURROUND
Lch
3
+ : White
− : Blue
Connect to the antenna.
7 FM indoor antenna
Tape the antenna where reception
is the best.
Adhesive tape
5 CENTER