Timer - Panasonic SC-EN38 Operating Instructions Manual

Timer

The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function on/off.
• Each time you press the button:
OFF (Canceled)
g To check the remaining time
The play timer and sleep timer can be used together. The sleep timer
always has priority. Be sure not to overlap timer settings.
8
Press [SLEEP] once
You can set the timer to come on at a certain time to wake you up.
Preparation:
• Turn the unit on and set the clock.
• Prepare the music source (disc, radio, iPod or music port) and set the
volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
zPLAY
 "ON TIME" is displayed. Within 5 seconds, press [u, 2] or
[i, 1] to set the starting time.
 Press [CLOCK/TIMER] to confirm.
 "OFF TIME" is displayed. Repeat steps 2 and 3 to set the finishing
time.
To activate the timer
 Press [zPLAY] to turn on the timer.
 Press [^] to turn off the unit.
To Action
Change the settings Repeat steps 1 to 4 and 6.
Change the source or
 Press [zPLAY] to clear zPLAY indicator
volume
from the display.
 Make changes to the source or volume.
 Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to select
Check the settings
(when the unit is on or
zPLAY.
in standby mode)
Cancel Press [zPLAY] to clear the timer indicator
from the display.
• The timer will start at the preset time, with the volume increasing
gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while the timer is functioning, the
finish time setting will not be activated.
• When MUSIC PORT or iPod is selected as the source when the timer
comes on, the system turns on and engages MUSIC PORT or iPod as
the source. If you wish to playback from the portable audio equipment,
activate the equipment's play mode and increase the volume. (See the
portable audio equipment's instruction manual.)
Original display