Midwest Skudo Assembly Instructions

To use the pull handle, release the locks
near the carrying handles and swing the
pull handle up and over to the front of the
carrier.

DISASSEMBLING THE CARRIER:

Release the Assembly Buckles
by pushing the yellow buttons to
allow Buckles to disengage. As you
lift up on the Carrier Top, remove
the Door and completely remove
the Carrier Top. The Door and
Carrier Top can be nested inside
the Carrier Bottom for storage.
For a Complete Listing of Products
Crates • Pet Beds
Crate Casters • Ex Pens • Kennels . . .
- Come Visit Our Website
Skudo Travel Carrier Large INST (146)
Assembly Instructions for Models 1427TSG, 1432TSG, 1436TSG

IMPORTANT INFORMATION

This carrier is intended for well-trained pets. Supervision required. Remove collar, tags and leads from pet before
placing it in the carrier to prevent possible entanglement. Contains small parts. Keep out of reach of children.
Approved for use on most major airlines. It is recommended that you check with the airline for specifications prior
to booking.
Unwrap and remove all parts from packaging. Keep all packaging material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement.
Please save sales receipt as proof of purchase for warranty purposes. To protect the finish of your travel carrier
use only mild, non-abrasive cleaners and water. Any course scrubbing or abrasive materials could damage
the plastic.

PARTS IDENTIFICATION

A Carrier Bottom (1)
B Carrier Top (1)
C Door with Spring Loaded Latch (1)
D Assembly Buckles with Yellow
Buckle Hinges (Pre-assembled): 5
with the 27" and 32" carriers; 9 with
the 36" carrier.
E Storage Compartment Lid(s): 2 come
pre-attached on the 32" and 36"
carriers; 1 comes unattached on the
27" carrier
F Locking Door Hinges (2 Left, 2 Right)
NOTE: Optional rolling casters sold
separately.
B
E
C
F
D
1