Midwest Spree Series Quick Start Manual

Pet carriers

IMPORTANT INFORMATION

Remove collar, tags, and leads from pet before placing it in the home to prevent possible

entanglement.

Unwrap and remove all parts from the box. Keep the box and packing material until the product is

assembled. In case of return or exchange, failure to return product in similar condition as received

could result in limited reimbursement. Please save sales receipt as proof of purchase for warranty

purposes. Check to ensure you have all the parts below. If you discover any parts are missing,

immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m.

EST) or email customer service at info@midwesthomes4pets.com.

PARTS IDENTIFICATION

Knobs (2)

Door Hinges (4)

ASSEMBLY INSTRUCTIONS

Twist the Knobs, Door Hinges, and Strap Hooks to

detach them from the plastic packaging.

Attach the Knobs to the front side of the Plastic Bottom. To insert, start with the "unlock"

symbol at the bottom. When assembled, the Knob will twist 90 degrees clockwise to lock and

90 degrees counter-clockwise to unlock.

Strap Hooks (2)

Door (1)

800-428-8560

midwesthomes4pets.com

P.O. Box 1031

Muncie, Indiana 47308

Plastic Bottom (1)

Plastic Top (1)

Table of Contents

Do you have a question about the Spree Series and is the answer not in the manual?

Page 1 800-428-8560 midwesthomes4pets.com P.O. Box 1031 Muncie, Indiana 47308 IMPORTANT INFORMATION Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement. Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled.
Page 2 Starting at the back of the carrier, place the Plastic Top on the Plastic Bottom, aligning the tabs on the Plastic Top with the holes on the Plastic Bottom around the carrier’s perimeter. Slide the Top slightly forward until it clicks into place on the Plastic Bottom.
Page 3 Attach the two Strap Hooks to the Carrier Top. These simply snap into place. To view the Spree Assembly Video, scan the code or visit our MidWest Homes For Pets YouTube page at https://youtu.be/iI9EuLrOwgU.
Page 4 LIMITED MANUFACTURER’S WARRANTY For one (1) year from the date of original purchase, MidWest Homes For Pets (“MIDWEST”) warrants to the purchaser of this pet home that, should it prove defective by reason of improper workmanship and/or material, the manufacturer will repair or replace, at its option, any defective part of the pet home, without charge for the part or for shipping.