11
- 4 - COLLEGAMENTI
4.1 COLLEGAMENTI DIFFUSORI
Si possono collegare diffusori con ingresso audio
70 V e 100 V o gruppi di diffusori con impedenza
totale non inferiore a 4 Ω attraverso i morsetti a
vite, posti sul pannello posteriore. Prestare sem-
pre attenzione alla corretta polarità.
SPEAKER OUTPUT
4
8
8
PA120T/PA240T/PA360T
IT
- 4 - CONNECTIONS
4.1 CONNECTING SPEAKERS
It's possible to connect 70 V, 100 V speakers or
speaker group with a total impedance of 4 Ω as a
minimum to the screw terminals on the rear pan-
el of the amplifier. When connecting the speak-
ers, always observe the correct polarity.
SPEAKER OUTPUT
EN
Fig.3