Page 1
MZA8412 AMPLIFIER MIXER ZONE HIGH HIGH HIGH HIGH PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK PROT PROT PROT PROT CLIP CLIP CLIP CLIP LEVEL HIGH HIGH HIGH HIGH POWER CH 1 CH 2 CH 3 CH 4 MZA8412 MUTE...
Page 2
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
2. 2 Rear Panels 2. 3 Block diagrams 2. 3 Block diagrams 2. 4 Specifications 2. 4 Specifications 3 General criteria for installation of sound al criteria for installation of sound systems systems Packing content: • MZA8412 • User manual...
MZA8412 WARNING! Before carrying out any operations with the unit, carefully read this instruction manual, and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with .
MZA8412 - 1 - INTRODUCTION 1.1 - DESCRIPTION MZA8412 is a 4 zone mixer, 2U amplified rack, equipped with 8 inputs and 4 assignable outputs. FEATURES • It is suitable for installation where a specific sound is required in different areas.
Page 6
MZA8412 PHYSICAL • Cooling: heat sink without fan • Dimensions (WxHxD): 482x88x320mm • Rack unit: 2 • Weight: 9kg HIGH HIGH HIGH HIGH PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK PROT PROT PROT PROT CLIP CLIP CLIP CLIP LEVEL...
MZA8412 - 2 - OPERATING ELEMENTS AND CONNECTIONS 2.1 - FRONT PANEL HIGH HIGH HIGH HIGH PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK PROT PROT PROT PROT CLIP CLIP CLIP CLIP LEVEL HIGH HIGH HIGH HIGH POWER CH 1...
2. REMOTE INPUT These RJ45 jacks allow to connect with WP1(wall control panel) for adjusting volume and inserting music source of remote area. WP1 WALL CONTROL Features Wall Control Panel for MZA8412 and MZX84. ACTIVE Controls • Volume control for Wall Panel Mic and Line input or Remote main set VO L source.
MZA8412 2.4 - SPECIFICATIONS Technical data MZA8412 RMS Output power 120W X 4 Constant impedance output 83 Ohm Constant voltage output 100V Input sensitivity/ impedence mic input - 50dB~ - 6dB / 20KΩ Balanced Input sensitivity/ impedence line input -30dB~ + 14dB / 20KΩ Balanced XLR, Mic 1-4, 6.3mm jack for line 1 - 8, RCA...
Page 11
MZA8412 - 3 - GENERAL CRITERIA FOR INSTALLATION OF SOUND SYSTEMS INTRODUCTION This guide represents a quick introduction to the criteria for the installation of a sound system at constant voltage or constant impedance. A sound system must be made by qualified personnel only, who must evaluate the needs of the user and the...
Need help?
Do you have a question about the MZA8412 and is the answer not in the manual?
Questions and answers