Anti-Theft System - Panasonic CQ-C3401U Operating Instructions Manual

Anti-Theft System

E
N
G
L
I This unit is equipped with a removable face plate. Removing
S
this face plate makes the unit totally inoperable. SLED will
H
blink.
27
Remove the Face Plate
q Switch off the power of the unit.
w Press [OPEN]. The face plate will be opened.
e Push the face plate to either the right or left.
r Pull it out toward you.
t Gently press the bottom of the case and open the cover.
y Place the face plate into the case and take it with you
when you leave the car.
Install the Face Plate
q Fit the face plate with its left hole on the left pin provided
on the main unit.
w Fit the other hole on the other pin applying slight pres-
sure.
e Move the face plate up and down a few times to make
sure it is secure. Then close the face plate and press
down the right side of the face plate until it clicks into
plate.
Security Indicator (SLED)
SLED blinks when the face plate is removed from the unit.
This function is activated when the Security Function is ON.
(a Page 26)
Face Plate Removal Alarm
This alarm sounds to warn you not to forget to remove the
face plate before leaving your car.
This function is activated when the Security Function is ON.
(a Page 26)
Caution
¡ This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡ Do not remove the face plate while driving your car.
¡ Do not place the face plate on the dashboard or nearby areas where the temperature rises high.
¡ Do not touch the contacts on the face plate and on the main unit, since this may result in poor electrical contact.
¡ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
¡ To avoid damaging the face plate, do not push it down or place objects on it while it is open.
28
CQ-C3401U/C3301U
(a Page 10)
OPEN
[OPEN]
Removable Face
Plate Case
6
Contact
3
1
Security Indicator (SLED)
2
3
4
5
2